AKL EVDGH | FAN 30-130 CFM ECO EXHAUST VARIABLE SPEED MOTION AND HUMIDITY SENSING

AKL EVDGH
FAN 30-130 CFM ECO EXHAUST VARIABLE SPEED MOTION AND HUMIDITY SENSING

EVDGH: 30 to 130 CFM at less than 0.3 sones - Air Kings ENERGY STAR certified Variable Speed ECO Motion and Humidity Sensing Exhaust Fan solutions provide barely audible sound levels with effective and efficient automated ventilation. Details: Excellent ASHRAE 62.2 solution. ENERGY STAR certified. Can be used to comply with California Title 24 requirements as well as CALGreen. Can be used to comply with the ventilation standards required by LEED for Homes. Integrated motion sensor detects when the room is occupied and turns the fan on. Once the room is vacated, the fan continues to run for a preset amount of time to make sure proper ventilation has occurred. Sensor can be set from 30 seconds to 80 minutes. Integrated humidistat senses the humidity level of the room and turns the fan on until the humidity level is below the preset percentage. Humidity level can be set up to 80% relative humidity. 8 capacity settings on low speed allow the fan to be set to the required exhaust rate for continuous ventilation. Low speed set points include: 30, 40, 50, 60, 70, 90, 100 & 120 CFM. High-speed rapidly clears the air of moisture, odors or other contaminants. High-speed set points include: 80, 110, 130 CFM & Boost. The variable speed ECO motion and humidity sensing exhaust fan easily installs using the included adjustable hanging brackets. UL listed for installation over a tub or shower on a GFCI circuit. 6 inch round duct connector with gasketed damper protects against backdrafts and seals the duct better than any other damper on the market today. Side access panel allows you to wire the fan from inside or outside the housing. HVI Certified performance.