ICA CS-1X4HDMSPL5 | SPLITTER HDMI 1 IN 4 OUT SUPPORTS 2.0, HDCP, 18Gbps, HDR

ICA CS-1X4HDMSPL5
SPLITTER HDMI 1 IN 4 OUT SUPPORTS 2.0, HDCP, 18Gbps, HDR

The CS-1X4HDMSPL5 with built-in scaling provides the ability to take any standard resolution and downscale it to match each of the connected displays (up to 4), simultaneously. For example, show 4K at 60Hz content on a 4K display while also showing the same content scaled down on a 1080p display. Unlike traditional splitters, this built-in scaling allows legacy devices to work with newer higher resolution displays in the system, without automatically defaulting to the lowest resolution. Video quality on newer TVs is no longer sacrificed by having an older model in the mix. Supports HDMI 2.0 and HDCP 2.2 (and earlier versions). Supports 1080p, 3D, 4K/60Hz 4:4:4 up to 18Gbps. Built-in scaling and EDID management to allow multiple resolutions simultaneously. All HDR formats supported. Copy = Copies the EDID of Display hooked up to output 4 and scales DOWN to the other display. Auto = Defaults the unit to only go as high as 4K at 60Hz Non-HDR. It will still DOWN scale from there but if you have a TV and Source that are capable of HDR then it will NOT display the HDR signal. Mixed = Classic HDMI Splitter setting using the highest common denominator. Meaning, if you have 1 TV that is 1080P and another tv that is 4K at 60 HDR then it will only display 1080P like classic splitters. NOTE: this unit scales resolution only and does NOT scale framerate.