INT 561778 | INJECTOR OUTDOOR VANDALPROOF GIGABIT POE+ ONE 30 W PORT IP67 WATERPROOF METAL HOUSING

INT 561778
INJECTOR OUTDOOR VANDALPROOF GIGABIT POE+ ONE 30 W PORT IP67 WATERPROOF METAL HOUSING

The Intellinet Network Solutions Outdoor Vandalproof Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This injector has an output power rating up to 30 watts, which is enough for many power-hungry PoE devices. Hardened design for outdoor and industrial use - This PoE+ injector is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating, vast operating temperature range of -40 - 75°C (-4 - 140°F) and vandal-proof IK10 score make this Power over Ethernet injector able to withstand harsh conditions and industrial environments. Beyond that, it has ratings for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6). Reduced wiring costs - There's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the Injector through its two-pin terminal block, simply connect this PoE+ Injector to the LAN switch port, and use the existing Cat5/6/6a cabling to deliver DC power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.) away. Safe protection for your expensive network equipment - The auto-sensing technology of this high-power PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete. Wall-mount option - For full installation flexibility indoors or outdoors, you can mount the injector on the wall through its four built-in holes. The required mounting kit comes included in the package. Power over Ethernet with output up to 30 watts. IP67-rated, dustproof and waterproof. IK10-rated, vandal-proof. Suitable for extreme operating temperatures of -40 to 75ºC (-40 to 167ºF). Compatible with IEEE 802.3at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more. Supports 10/100/1000 Mbps data rates. Distance support: up to 100 m (328 ft.). Auto-sensing PoE awareness to ensure that power is only sent to IEEE 802.3at/af-compliant devices; non-PoE devices only receive data. Short-circuit, overload and high-voltage protection. Grounding point to protect equipment from external electrical surges. Port surge protection up to 6 kV. ESD protection up to 8 kV (air) and 6 kV (contact). Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6). Mounting holes for wall mounting. Earthing kit included. Saves time and money by delivering data and power via existing network cables. Plug-and-play installation; no configuration required. Fully NDAA-compliant.