LNR H312KIT | ENCLOSURE 12"X 12" PLASTIC W/COVER

LNR H312KIT
ENCLOSURE 12"X 12" PLASTIC W/COVER

The H312KIT from Linear is a 12 inch Plastic Enclosure, Includes Cover provides grid mounting space for Linear structured wiring components. The enclosure is ETL Listed and features 19 grid inches of mounting capacity in two 9-1/2 inch columns. Structured wiring modules snap securely into the enclosure?s mounting grid. Recommended enclosure for the M&S Systems DMC-10H Structured Wire Intercom Hub. The enclosure mounts in the wall between standard 16-inch spaced studs, or it can be surface mounted. The flexi-mount system features four flexible mounting tabs on the sides of the enclosure. The flexi-mount tabs compensate for varying stud spacing and allow for adjusting the depth of the cabinet for flush-mounting with all thicknesses of drywall. A snap-on cover that can be screwed shut is supplied with the enclosure. The vented cover has a raised interior, allowing for easy wiring and better component cooling. Eight combination conduit knockouts (four along the top, two on the bottom, and one on each side) that fit either 2 inch or 1/2 inch conduit fittings are provided. The enclosure has an additional knockout on the bottom to mount a single-gang junction box for AC outlet installation. Features: 12 inches high, 19 grid inches (2-9.5 inch columns). Fits between studs. ABS construction. Flexi-mount system (slots and tabs allow for surface or flush mount). Electrical J-box knockout on bottom. Eight combination 1/2 inch or 2 inch knockouts including two located on the sides of the box; Paint shield and four Philips head screws included; Snap-on vented cover included; ETL Listed.